What To Do If You Have a Burst Water Pipe

A Plumber Works on a Burst Pipe.

What to do if you have a burst water pipe

When it freezes in Fort Worth, TX, burst pipes are always a possibility. If you’ve had a pipe burst, you want to take care of it as soon as possible to minimize water damage while you’re waiting on your plumber for repairs. The first thing to do is shut off the water. Once the water is shut off follow these steps to save your home from serious water damage:

  • Clean up the water already there to prevent property damage and mold growth.
  • Drain faucets and flush toilets to clear out water that’s left in the system.
  • Warm the pipes to gradually unfreeze them. Do this by opening doors to keep warm air circulating, especially where pipes are exposed. Use a hair dryer to warm pipes if the warm air isn’t heating them quickly enough.

When you have a burst pipe, you can get 24/7 emergency plumbing service in Fort Worth, TX by calling Westside Plumbing at (817) 560-4144. Don’t hesitate to call. We’ll get you on the schedule and respond promptly with fast, effective repairs.

How do you know if your pipes burst?

Freezes are typically the time when people discover they have a burst pipe. Unless water suddenly comes bursting through a wall, it might not be apparent that your pipes have broken. Some things to look for include:

  • Frost or icicles on the exterior of the pipe. The pipe is frozen and could burst if it defrosts too quickly or may have already burst.
  • Stains suddenly appearing on your walls or ceilings. Any discoloration usually means water is leaking from your pipes or possibly from your roof.
  • Low water pressure or no water coming from pipes.
  • Foul odor coming from the pipe. This often happens if a clog has caused the pipe to burst and has prevented the odors from escaping.
  • Rusty or discolored water coming out of your faucets. This usually means your pipes are corroded and may break.
  • Higher water bills often indicate a leak is present in your pipes.

What happens when a pipe bursts?

Burst pipes typically occur when your pipes freeze. What happens to cause the pipe to burst?

  • Water freezes inside the pipe, and as it expands, it puts pressure on the pipe’s walls.
  • The pressure builds up between the faucet and the blockage of ice.
  • The pressure build-up causes the pipe to break, especially if it has frozen several times and the walls are weakened by expansion and contraction from rapid heating.

Can a leaking pipe burst?

You might not think a small pipe leak is such a bad thing. It hasn’t broken through the wall or stained your ceiling. You think to yourself it’s probably OK to leave it alone a little longer. Meanwhile, the water keeps steadily flowing through your pipe and wearing it down. Additionally, pressure from the hole in the pipe and all the extra water is building up. As the pressure builds up and the pipe weakens, you’ll have a burst pipe on your hands.

How long does it take to fix a burst pipe?

A frozen pipe burst repair can take anywhere from two to four hours to complete and could take as long as 24 hours. Much of the time it takes to repair the pipe will be consumed in finding the location of the break—very few are bursting through walls—and determining the size of the break.

Repair burst pipe in wall

More often than not a burst pipe repair will require plumbers to get behind your walls. You may have discovered that a pipe has burst behind a wall because it’s left a stain on the wall. Once you’ve discovered that stain, to stop further water damage, you want to shut off the water and open a faucet to drain off any remaining water. Also get as much water cleaned up as possible and call a great plumbing professional like those at Westside Plumbing to get fast, effective repairs.

How to fix a burst pipe outside

Whether you have a burst pipe inside or outside, if you can get to the pipe, you can take these steps to make a quick temporary fix that will minimize damage until plumbing professional gets there.

  • Shut off the water at the main valve.
  • Get a piece of rubber to place over the leak.
  • Take a small block of wood and place it on the piece of rubber.
  • Surround the block and rubber with a C-clamp, placing the stationary part of the clamp against the pipe and the screw against the wood block.
  • Tighten the C-clamp over the wood block. Make sure the fit is snug.

A Burst Pipe

Burst pipe repair near me

If you’ve discovered a pipe has burst and you need fast burst pipe repair in Fort Worth, TX, turn to the experts at Westside Plumbing. We are available 24/7 for emergency plumbing repair. All you need to do is call (817) 560-4144.